The choice of the right sisal fabric ring, with the right combination of sisal fabric and possibly cotton fabric, the right number of quilting circles and the right dimensions, must be determined on a customer-specific basis for the respective application.Solid sisal fabric rings consist of 8-layer sisal fabric with a 45º diagonal cut, i.e. the warp and weft threads are at an angle of 45º to the outer diameter. This prevents the threads from being torn out and the associated fraying of the sisal fabric rings, ensures clean processing and significantly increases the tool life. The standard stitching for sisal fabric rings is 10 mm seam spacing. However, different quilting can be produced at any time upon request. The core can be delivered with or without a cardboard core, but also with a steel ring insert.In order to obtain optimal work results, it is recommended to use impregnations for the sisal fabric rings. Impregnations improve the service life and adhesion of the polishing paste.

In principle, one can say that very hard impregnations are also used when processing workpieces made of very hard materials. However, very soft impregnations are also used for workpieces made of very soft materials.The sisal fabric rings are used for pre-polishing, fine grinding, brushing and matting of flat and slightly rounded workpieces. They are efficient “pre-polishing rings” for all workpieces, such as flat parts, cooking pots, aluminum parts, etc. The sisal fabric rings have a good attack effect and low noise development during the machining process.Diameter: 200 to 500 mm

Width: 5 to 30 mm depending on the number of layers

Bore: according to specifications