The deburring grinding discs of the FAPI-150 series are the ideal tool for deburring on automatic and manual deburring machines (e.g. our deburring machine FAPI-STARGRINDER) and are particularly suitable for processing larger series. The 25 mm bore and 4 driver holes enable easy assembly and positioning of the FAPI-150 deburring grinding disk on the deburring machine.

We would be pleased to advise you on which deburring discs can be used in your processing, in order to achieve top process results.

• Shortest set-up times
  The 25 mm bore and 4 driver holes enable easy assembly and positioning of the FAPI-150 deburring grinding disk on the deburring machine.

• A wide variety of trim materials
  By selecting different densities, trim lengths, types of abrasive cloth and abrasive fleece, you can have a decisive influence on the deburring process. The optimal design of the deburring grinding disc FAPI-150 can be determined from the process parameters dry or wet grinding, the material to be processed, the material thickness and the desired surface quality or the desired roughness depth.

• Picard tip
  The coarser the grain size of the FAPI-150 deburring sander is selected, the greater the edge rounding on the workpiece.

• Individual slat positions
  The deburring sanding disc FAPI-150 has abrasive cloth slats attached to the front, which are supported by abrasive fleece slats. Due to the special position of the lamellae, FAPI-150 deburring grinding discs can be manufactured individually for the respective machining process.

• Made in Germany
  Without exception, all Picard tools and naturally also our deburring discs series are made in Germany. High quality and optically outstanding grinding tools are the results of our production and you, as our customer, benefit from this.

For further information about the abrasive fleece qualities please click here.

By further optimizing the trim arrangement as a double row or Y variant, the deburring result can be significantly influenced.Why the different stocking arrangements?

The single-row trim is our standard version. Here we can influence the hardness or flexibility as well as the stock removal rate by using different non-woven abrasive variants in combination with abrasive cloth.

In our Y version, the stock is evenly compacted. Here the trimming material is evenly distributed on the outer circumference and towards the center of the deburring sanding plate. With this arrangement, a higher removal rate can be achieved, as the trim can adapt better to contoured cutouts.

The double-row version is the variant with the highest flexibility. By dividing the fill width, the fill can adapt even better to the edge and thus also deburr smaller cut-outs better. The fill hardness can also be adjusted by using our grinding fleece variants.Once the sheet metal has been stamped, flame cut, lasered or cut with a water jet, at least one burr appears in the cutting area. This can best be removed using FAPI-150 deburring sanding discs. This deburring or edge rounding of sheet metal parts is carried out on automatic, stationary deburring machines.Our FAPI-150 deburring grinding discs can be used on deburring machines from the following manufacturers:

• Bütfering
• Löwer
• RWT
• Löser
• GECAM
• Niederberger
• Vangroenweghe

Diameter: 150 mm
Stocking height: 50 mm
Drilling:: 25 mm + Driver holes
Total height: 65 mmTrim width:
38 mm (Single row)
37 mm (Y variant)
30 + 20 mm (Double row)