Deburring discs FAPI-SOLID

The deburring discs of the FAPI-SOLID series are the ideal tool for maximum deburring performance. A solid tool for solid results. Any feed that can be driven faster, every minute that is less needed to reach your target, brings enormous savings potential. This is our incentive and can be implemented with our FAPI-SOLID series.

FAPI-SOLID achieves a process improvement due to the often higher use of abrasives. It is deburred and rounded faster and in a shorter time. Convince yourself of our new series FAPI-SOLID.

We will be pleased to advise you which facing type is best suitable for your application case.

Product features

  • Most different facing materials
    The correct selection of the abrasive cloth type has a decisive influence on the deburring process. The optimum type of deburring disc FAPI-SOLID can be determined based on the process parameters, the material being treated, the material thickness and the required surface quality or the desired roughness depths

 

  • Picard tip
    The coarser the grain size of the deburring disc FAPI-SOLID, the stronger the edge rounding on the workpiece would be.
  • Shortest process times
    The deburring resp. processing times can be significantly reduced due to the high abrasive content, the special tool design and lamellae arrangement. Due to the high density of the number of flaps and the special property of the abrasive structure, an intensive edge rounding can be achieved.

 

  • Made in Germany
    Without exception, all Picard tools are made in Germany. High quality deburring tools are the results of our production and you, as our customer, benefit from us.

Facing types

BROWNthe allrounder suitable for all materials
BLUEour zirconium corundum variety for steel
and higher steel alloys
VIOLETthe stainless steel variety
BLACKour variety for the processing of aluminium
CUBIRINHA EXTREMEfor stainless steel and higher steel alloys

We have the optimum facing type for each material to be processed in order to achieve a perfect and solid result.
You can choose between aluminum oxide, zircon corundum, silicon carbide or also varieties of the ceramic line.

Facing varieties

Why different facing arrangements?

The single-row facing is our standard version. The hardness resp. flexibility as well as the stock removal rate can be influenced by using different abrasive cloth varieties.

The double-row version is the variety with the highest flexibility. By dividing the facing width, the facing can adapt even better to the edge and thus also deburr smaller cut-outs better. The facing hardness can also be adjusted by using our abrasive cloth varieties.

single-row (standard)
double-row

Mountings

FAPI-M14
Ø 115 mm | RL

FAPI-TRIM
Ø 115 mm | CW
Ø 125 mm | CW+CCW

FAPI-FIT
Ø 150 mm | CW+CCW

FAPI-150
Ø 150 mm | CW+CCW

FAPI-180
Ø 180 mm | CW+CCW

FAPI-250
Ø 250 mm | CW+CCW

*CW = clockwise rotation | CCW = counter-clockwise rotation

Applications

Once the sheet metal has been stamped, flame cut, lasered or cut with a water jet, at least a burr appears in the cutting area. This can be optimally removed by use of the deburring disc FAPI-SOLID. This deburring or edge rounding grinding of sheet metal is carried out on automatic, stationary deburring machines.

Our deburring discs FAPI-SOLID can be used on deburring machines of the following manufacturers:

TIMESAVERS | LISSMAC | COSTA | EMC | DMC | HEESEMANN | GECAM | LOEWER | Q-FIN | RWT | VG MACHINES | VIET | WEBER | STEELMASTER | FLADDER | HOUFEK | KUHLMEYER | LOESER