In the FAPI-PUS DICHT contact disc, the aluminum core is provided with closely spaced polyurethane foam lamellae.

The height of the covering or the length of the polyurethane foam slats can be selected variably depending on the application (standard: 20 mm and 35 mm).

By covering it with polyurethane foam lamellae, the contact disc has a “running cushion” that allows for (very) fine grinding, especially on (strongly) curved and profiled parts.

The covering adapts easily to any workpiece to be sanded. Above all, the softer coating design of the FAPI-PUS DICHT contact disk contributes significantly to the cooling of the sanding belt, as the heat from the belt grinding process is dissipated through the spaces between the lamellas.The contact disks of the FAPI-PUS series are exclusively covered with polyurethane foam slats.Advantages of contact discs with polyurethane foam slats:

  • Highly elastic (adaptable)
  • Wear resistance
  • Oil resistance
  • Grease resistance

Due to these outstanding properties, the contact discs of the FAPI-PUS series have proven themselves on the market for decades.The contact disk FAPI-PUS DICHT is particularly used when high-quality surfaces on heavily profiled or heavily rounded parts need to be achieved in the shortest processing time.Grinding operation:Surface grinding, round grinding, profile grinding

Grinding type: dry grinding process

Handling: Automatic grinding, hand-held machines, hand grinding bench/backstand, robot grindingDiameter: 75 to 450 mm
Width: 20 to 200 mm
Slat height: 20 mm / 35 mm / as specified
Bore: according to specifications

Further dimensions on request!The hardness of the polyurethane foam slats is only available in one level with approx. 15° Shore (A). The contact disks of the FAPI-PUS series are used when the hardness spectrum of the FAPI-VUS series is no longer sufficient.The contact disk FAPI-PUS DICHT is particularly used when high-quality surfaces on heavily profiled or heavily rounded parts need to be achieved in the shortest processing time.Grinding operation:Surface grinding, round grinding, profile grinding

Grinding type: dry grinding process

Handling: Automatic grinding, hand-held machines, hand grinding bench/backstand, robot grindingThe hardness of the polyurethane foam slats is only available in one level with approx. 15° Shore (A). The contact disks of the FAPI-PUS series are used when the hardness spectrum of the FAPI-VUS series is no longer sufficient.Diameter: 75 to 450 mm
Width: 20 to 200 mm
Slat height: 20 mm / 35 mm / as specified
Bore: according to specifications

Further dimensions on request!